SMC Micro (1 3/8") PMP Single

(No reviews yet)
SMC Micro (1 3/8") PMP Single

SMC Micro (1 3/8") PMP Single

These are the smallest of three sizes of Prusik Minding Pulleys made by SMC, but don’t let their small size cause you to question their performance! These pulleys are designed and manufactured to the same high quality standards as the full-sized PMP’s. The wide base design maximizes the effectiveness of a Prusik hitch while a unique side plate formation allows the use of larger ropes in a compact pulley. An oversized bell-shaped top hole accepts a large rescue carabiner or multiple small carabiners. The single can be rigged with 2 carabiners in a way that the 2nd carabiner serves as a Becket. Solid side plates help prevent foreign object access and reduce snagging and are precisely tensioned for easy one-handed operation and secure placement at any point along the rope. Sealed ball bearings provide optimal efficiency and reduce the  performance-robbing resistance that is inherent in most multiple component systems and are not prone to failure under misaligned loads or with twisted gear that may occur with needle bearings.

Color: Red/Grey
Type: Single Pulley
MBS: 22 kN (5000 lbf)
Weight: 3.5 oz (99 g)
Length: 3.75" (9.5 cm)
Width: 2.55" (6.5 cm)
Height: 1.12" (2.8 cm)
Axle: Ball Bearing
Sheave: 1.37" Aluminum
Tread: 1.00"
Max Rope Size: 13 mm
Material: Aluminum

Write a Review