Conterra SCARAB® Rescue Tool
This device will absolutely change the way you perform rope rescue. The Scarab® represents five years of research and testing by Rick Lipke and the design team at Conterra. It was born out of the need for a small, simple device that could easily control heavy rescue loads, as well as excel at pick offs, twin rope systems and other general rescue techniques. The Scarab® does all this and more. With two models available, the Scarab® is the perfect choice for both Fire/Rescue and back country rescue environments:
• Incredibly strong • Does not twist the rope • Instantly adjustable friction (just wrap a horn) • Lower 600 lb loads with two fingers • Super easy lock off • Easy to use, right or left handed • Single and double rope capable • Attach rope without unclipping from anchor
The Scarab® TI Ultra light alpine rescue tool: Machined from solid Titanium plate. Works with 6mm to 11 mm rope. Weight: 185g (6.6 oz)
The Scarab® FR Ultra versatile general rescue tool: Machined from solid 303 stainless plate. Works with 9mm to 13 mm rope. Weight: 385g (13.8 oz) meets NFPA 1983 (06 ED) “G” (general use) FOR 12.5mm ROPE -The Scarab® is light and strong.
The Scarab has endured over five years of drop and slow pull testing as well as undergoing extensive heat and wear studies utilizing Conterra’s Capstan Test Bed. -The frame and crossbar’s strength is greater than 40kN. In real world tests with Nylon rescue ropes, the ropes fail at the nose of the Scarab® at about their knotted strength (just like most other descent control devices). When pulling a 12.7mm rescue rope on a tied off Scarab®, the rope breaks at about 27kN, which easily exceeds the 22kN strength rating that NFPA calls out for to rate class “G” for descent control devices. In addition to a battery of slow pull and drop tests, the Scarab® has undergone extensive heat and wear studies. One device was tested by pulling over a mile of dirty rope through it under rescue sized tension, with temperature reading thermocouples being monitored at several locations during pulls. At 2kN of tension, and a lowering speed of 10M per minute, the Scarab® maintained a frame temperature at about 100 degrees C. To our knowledge, the Scarab® is the only descent control device to have been tested to this degree.
Scarab® is a registered trademark of Conterra Inc. All rights reserved. Built by Conterra Precision, our own in house ISO 9001 certified facility. Conterra truly believes the Scarab® will outperform any other rescue descent control device made.
How to rappel with a Conterra Scarab®
www.Conterra-Inc.comInstructions for basic rappelling with a S...
Conterra Guiding Line for Rope rescue with a Scarab
This is a guiding line rope rescue operation performed on an 8...
Snow Rescue using a Conterra Scarab on Mt. Baker
Snow Rescue on Mt. Baker: Steep angle lower and raise training...
Conterra Tower Rescue.m4v
390 foot tower rope rescue with Scarab ® supervised by Conterr...
Panorama Pick Off using a Scarab Rescue Tool
Panorama rappel based pick off technique using a Conterra Scarab
Rope Rescue Testing - Scarab Drop Test
This test was done to observe if the Conterra SCARAB would b...
How to lower with a Scarab Rescue Tool
www.Conterra-Inc.comInstructions for basic lowering operations...
Rope Rescue B.C. tilt lift pick off using a Scarab rescue tool
This is a rope rescue training operation high in the North Cas...